Results 1 to 15 of 15
Thread: Where Can I Find A Wizard’s Gem?
-
2020-09-10, 04:47 PM (ISO 8601)
- Join Date
- Feb 2011
Where Can I Find A Wizard’s Gem?
Specifically, I’m looking for something like the crystal that Gandalf had in his staff in Fellowship. I know there are versions of the entire staff available online, but they cost hundreds of dollars, and I’m just looking for the crystal.
But my search-fu has failed me, because no matter what terms I try, I can’t come up with anything that resembles Gandalf’s crystal. Most of what I find involves a crystal or gem attached to a staff, and trying to find crystals on their own hasn’t panned out. Any ideas where I could find this?
-
2020-09-10, 05:03 PM (ISO 8601)
- Join Date
- Oct 2010
- Gender
-
2020-09-10, 05:30 PM (ISO 8601)
- Join Date
- Sep 2008
- Location
- Hudson Valley, NY
- Gender
Re: Where Can I Find A Wizard’s Gem?
There's a place near me called the Crystal Connection in Wurtsboro, NY. There may be something similar in your area.
You may try the Pyramid Collection catalog at least until the Ren Faires open again."We are the people our parents warned us about!" - J.Buffett
Avatar by Tannhaeuser
-
2020-09-11, 03:34 AM (ISO 8601)
- Join Date
- Aug 2013
Re: Where Can I Find A Wizard’s Gem?
New Age health shops?
-
2020-09-11, 08:20 AM (ISO 8601)
- Join Date
- Mar 2020
Re: Where Can I Find A Wizard’s Gem?
If you're looking for a fake, not actually made-of-crystal crystal your best bet would be cosplay website. They'll vary in cost based on size, durability and general realism, but they'll do the job. Though if you're aiming for a specific shape you might run into problems. If you're looking for an actual crystal, with the correct texture and level of durability there are entire websites and shops just devoted to stocking them - but you're going to have to have a specific name, type and cut of crystal you want, because they usually sell 'em based on that measure. Again, price can vary and postage might bleed you dry.
If you're still having no luck, and you really, really want it, you could always commission a modeller to make it. They'd probably 3-d print it or make it out of resin based on a specific design, and while you'd be paying a lot more than for a general cosplay prop (though it might be a little less expensive if you're only looking for a smaller, fit-in-the-fist model) you'd have complete control over the design and make.
Hope your search is fruitful, at any rate.I draw, and I write sometimes! Drow paladin avatar by me. They/Them
-
2020-09-22, 01:19 AM (ISO 8601)
- Join Date
- Aug 2008
Re: Where Can I Find A Wizard’s Gem?
Thanks in part to the shops snowblizz mentioned, crystals on their own are available on Amazon or Etsy. Just a search like "Large Quartz Crystal" should get you started, Flourite could also be something to substitute in for Quartz if it's more your style. Or even Hexagonal Prism or Hexagonal Obelisk, too.
Even if you don't have a 3D Printer, you could probably look up a few do-it-yourself tutorials on making silicone molds and resin casting. That'd probably be the better option if you want a really big crystal."Okay, so I'm going to quick draw and dual wield these one-pound caltrops as improvised weapons..."
---
"Oh, hey, look! Blue Eyes Black Lotus!" "Wait what, do you sacrifice a mana to the... Does it like, summon a... What would that card even do!?" "Oh, it's got a four-energy attack. Completely unviable in actual play, so don't worry about it."
-
2020-09-22, 08:59 PM (ISO 8601)
- Join Date
- Dec 2009
- Location
- Birmingham, AL
- Gender
Re: Where Can I Find A Wizard’s Gem?
3d printing wouldn't look nearly as good as an actual crystal, but it is doable with clear filaments or resins. Also, public libraries often have 3d printers available to the public, and they are usually excited for people to take advantage of them. There are numerous sites that offer free or cheap .stl files, and it's likely easy to commission someone to make a custom stl for Gandalf's crystal - it should be a pretty simple design. Hell, if I could use CAD software, I'd try to do it myself for ya.
All that being said, a resin printer or DIY resin casting would certainly do the job if you can't find a quartz or similar inexpensive clear crystal that you like or is in a reasonable price range.Cuthalion's art is the prettiest art of all the art. Like my avatar.
Number of times Roland St. Jude has sworn revenge upon me: 2
-
2020-09-23, 06:44 AM (ISO 8601)
- Join Date
- Aug 2013
Re: Where Can I Find A Wizard’s Gem?
Actually with a half decent resin 3d printer and a nifty translucent resin you could probably make a crystal much better than nature ever could.
I saw a test example of someone printing a large mask in a translucent-green resin medium and I swear you could not tell it was actually done layer by layer without a very good magnifying glass.
I've tried my hand at FDM printing a bit, got 2 machines behind me right now actually, and with plastic yea you can totally tell it was printed. But the way they make cheap SLA printers with mobielphone screens as the soruces of light you can do a very good quality at a unbelievable price. I'll admit it depends abit on the user. I've seen people get amazing results from exactly the same machine I have used and I couldn't get anywhere close to what I seen online.
Libraries are unlikely to have the SLA resin prisnters you'll want for this job though. It's messy and a pain working with resin compared to FDM plastics.
-
2020-09-23, 11:10 AM (ISO 8601)
- Join Date
- Dec 2009
- Location
- Birmingham, AL
- Gender
Re: Where Can I Find A Wizard’s Gem?
Resin printers have fantastic quality, yes, but it involves the cost of a resin printer (as you say and I neglected to mention, libraries will almost only ever have FDM printers), the resin bath, etc. If you're spending that much and want something better than nature, could just get a glass worker to make you a glass crystal.
Also (not for you, since I assume you know, but for anyone else interested, including OP), there are ways of finishing FMD prints so they don't look printed, but more often than not, that will ruin the look of translucent materials. Only one I can think of offhand that may work would be a clear ABS print chucked into an acetone vapor bath, which has the benefits of being cheap and easy, but the downside of finding a place with a printer that does ABS and has clear filamentCuthalion's art is the prettiest art of all the art. Like my avatar.
Number of times Roland St. Jude has sworn revenge upon me: 2
-
2020-09-26, 08:48 AM (ISO 8601)
- Join Date
- Sep 2020
- Location
- Irvine
Re: Where Can I Find A Wizard’s Gem?
I think I have seen something similar in an IG shop. They usually dropship from china. If you take a look at Aliexpress you may have a chance to find it.
I am a fan of Harry Potter and my house is Hufflepuff.
Do you know yours? You can find your house by What Hogwarts house are you in quiz
-
2020-09-26, 03:25 PM (ISO 8601)
- Join Date
- Nov 2009
- Gender
Re: Where Can I Find A Wizard’s Gem?
It's an interesting design, because it's fundamentally a quartz with a shape that reminds you of a flame or those flame-shaped lightbulbs. What about buying a flame-shaped lightbulb, removing the bottom, filling it with resin, and, once it's dry, removing the glass? (I personally have zero experience with such things, and don't know if there are risks involved, or whether the thing is doable).
Originally Posted by J.R.R. Tolkien, 1955
-
2020-09-26, 11:01 PM (ISO 8601)
- Join Date
- Dec 2009
- Location
- Birmingham, AL
- Gender
-
2020-09-27, 05:09 PM (ISO 8601)
- Join Date
- Feb 2013
-
2020-09-28, 09:13 PM (ISO 8601)
- Join Date
- Aug 2008
Re: Where Can I Find A Wizard’s Gem?
You know, it kind of reminds me of home-grown sugar crystals. Like, I know the actual "crystal" parts are the tiny repeating cubes, but I remember back in... Whatever year it was... My teacher had a washer tied to the string to keep the string straight in the solution, and sugar kinda jaggedy-clumped around that bit. The silly part of me just thinks you'd use a longer implement to weigh down the string, or a larger recipe/longer time spent waiting.
Probably not the best material for long use, though..."Okay, so I'm going to quick draw and dual wield these one-pound caltrops as improvised weapons..."
---
"Oh, hey, look! Blue Eyes Black Lotus!" "Wait what, do you sacrifice a mana to the... Does it like, summon a... What would that card even do!?" "Oh, it's got a four-energy attack. Completely unviable in actual play, so don't worry about it."
-
2020-09-28, 10:48 PM (ISO 8601)
- Join Date
- Sep 2008
- Location
- Hudson Valley, NY
- Gender